The torsion shear electric wrench is a type of electric tool specifically used for torsion shear high-strength bolts, mainly used in the steel structure installation industry. The purpose of this wrench is to break the plum blossom head of the torsion shear high-strength bolt and achieve the purpose of tightening the bolt.

扭剪型電動扳手的使用方法很簡單。，將扳手頭對準螺栓頭，然后扣動開關開始工作。幾秒鐘后，螺栓梅花頭將被打斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。這種電動工具的使用效果主要表現在沖擊電動扳手主要用于初緊螺栓，而電動扭剪扳手主要用于終緊扭剪型高強螺栓。

The use of a torsion shear electric wrench is very simple. Firstly, align the wrench head with the bolt head, and then press the switch to start working. After a few seconds, the bolt head will be broken, and then the wrench will be pulled out and the trigger will be pulled to eject the head, ending the work. The use effect of this type of electric tool is mainly manifested in that the impact electric wrench is mainly used for initial tightening of bolts, while the electric torsion shear wrench is mainly used for final tightening of high-strength torsion shear bolts.

此外，在使用扭剪型電動扳手時，需要注意一些事項。例如，使用前應該檢查扳手的完好性，確保其能夠正常工作。同時，使用時應該注意，避免受傷。在使用完畢后，還需要對工具進行清潔和保養，以延長其使用壽命。

In addition, some precautions need to be taken when using a torsion shear electric wrench. For example, the integrity of the wrench should be checked before use to ensure that it can function properly. At the same time, attention should be paid to safety during use to avoid injury. After use, it is necessary to clean and maintain the tool to extend its service life.

總之，扭剪型電動扳手是一種專門用于扭剪型高強螺栓的電動工具，具有使用簡單、方便、快捷等優點。在使用時，需要注意和保養，以保證其正常運轉和延長使用壽命。

In short, the torsion shear electric wrench is a specialized electric tool for torsion shear high-strength bolts, which has the advantages of simple, convenient, and fast use. When using, it is necessary to pay attention to safety and maintenance to ensure its normal operation and extend its service life.